| TECHNOLOGICAL TESTS FOR CERAMIC, REFRACTORY AND POWDER METALLURGY |
|---|
|
Analysis/Test Code |
Analysis/Test Name |
Method/Explanation |
Service Period (Workday) |
Sample Amount |
Service Fee (VAT Included) |
|---|---|---|---|---|---|
|
35-30-TS-01 |
Particle Size Analysis (by Laser Diffraction Method) Wet |
Performed according to TS ISO 13320 Standard. (Laser Light Diffraction Method) Sample should be sent in homogeneous form and the information on physical characteristics of the sample such as sample type, flocculation, viscousness, dissolvability etc. should be stated in the Analysis/Test Application Form. |
3 days |
500 g and particle size of the sample should be maximum 2 mm. |
160,00 TL /Sample |
|
35-30-TS-02 (Sample acceptance cannot be made temporarily.) |
Particle Size Analysis (by Laser Diffraction Method) Dry |
Performed according to TS ISO 13320 Standard. (Laser Light Diffraction Method) Sample should be sent in homogeneous form and the information on physical characteristics of the sample such as sample type, flocculation, viscousness, dissolvability etc. should be stated in the Analysis/Test Application Form. |
3 days |
1 kg and particle size of the sample should be maximum 2 mm. |
210,00 TL /Sample |
|
35-30-TS-15 |
Moulding and Drying Processes |
- |
5 days |
5 kg |
70,00 TL /Sample |
|
35-30-TS-16 |
Plasticity Water In Mud |
Performed according to TS 5396 Standard. |
5 days |
5-10 kg |
50,00 TL /Sample |
|
35-30-TS-17 |
Plastic Water (Plastic Limit) |
Performed with Pfefferkorn method. |
5 days |
5-10 kg |
50,00 TL /Sample |
|
35-30-TS-18 |
Plasticity Water (Liquid Limit) |
Performed with Atterberg method. |
5 days |
5-10 kg |
50,00 TL /Sample |
|
35-30-TS-19 |
Plasticity Index (Plastic Limit-Liquid Limit)
|
Plastic Limit is determined with Pfefferkorn Method and Liquid Limit is determined with Atterberg Method. |
5 days |
5-10 kg |
110,00 TL /Sample |
|
35-30-TS-104 |
BET Spesific Surface Area |
Information such as Brunauer, Emmett and Teller (BET) Method, Degas duration and temperature should be given in the Analysis/Test Application Form. |
3 days |
100 g or fragmentary sample |
355,00 TL /Sample |
|
35-30-TS-105 |
Multi Point BET and Pore Volume / Pore Size Distribution |
Information such as Brunauer, Emmett and Teller (BET) Method, Degas duration and temperature should be given in the Analysis/Test Application Form. |
3 days |
100 g or fragmentary sample |
705,00 TL /Sample |
|
35-30-TS-106 |
Firing Test |
Maximum firing temperature is 1650 °C. |
5 days |
0,5-1 kg |
325,00 TL /Temperature Point |