TECHNOLOGICAL TESTS FOR NATURAL STONE |
---|
(*) This Analysis/Test is accredited by Turkish Accreditation Agency (TÜRKAK) in accordance with TS EN ISO/IEC 17025 Standard.
Analysis/Test Code |
Analysis/Test Name |
Method/Explanation |
Service Period (Workday) |
Sample Amount |
Service Fee (VAT Included) |
||
---|---|---|---|---|---|---|---|
35-30-TS-68 |
Preliminary Technological Examination |
a) Plate Taking b) Polishing Ability c) Edge Corner Cutting tests are performed. |
4 days |
At least 1 sample at the size of 100x100x100 or 1 plate sample at minimum 50 mm thickness |
300,00 TL /Sample |
||
35-30-TS-69 |
Sample Preparation (Natural Stone) |
Covers the process of cutting the samples at the sizes stated in the standards. |
2 days |
- |
35,00 TL for the preparation of first 10 samples 12,00 TL for each 5 samples afterwards |
||
35-30-TS-70 |
Determination of Mohs Hardness |
Performed according to TS 6809 Standard. |
2 days |
At least 2 samples at the size of 100x100x100 |
35,00 TL /Sample |
||
35-30-TS-71 |
*Water Absorption Test in Boiling Water |
Performed according to TS 699 Standard. |
5 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 12 |
85,00 TL /Sample | ||
35-30-TS-72 |
*Impact Strength Test |
Performed according to TS 699 Standard. |
3 days |
At least 12 samples at the size of 40±1 x 40±1 x 40±1 mm |
120,00 TL /Sample | ||
35-30-TS-73 |
*Abrasion Strength Determination (Böhme Abrasion Test) |
Performed according to Method B of TS EN 14157 Standard. |
5 days |
At least 12 cubic samples at the size of 71±1.5 x 71±1.5 x71±1.5 mm |
400,00 TL /Sample | ||
35-30-TS-75 |
Determination of Uniaxial Compressive Strength (After Frost/According to Turkish Standard) |
Performed according to Article 6.15 of TS 699 Standard. Additionally; Analysis/test with TS-78 code is performed. |
20 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 40 |
415,00 TL /Sample | ||
35-30-TS-78 |
*Determination of Uniaxial Compressive Strength |
Performed according to TS EN 1926 Standard. |
5 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 20 |
120,00 TL /Sample | ||
35-30-TS-82 |
*Determination of Water Absorption at Atmospheric Pressure |
Performed according to TS EN 13755 Standard. |
7 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 12 |
85,00 TL /Sample | ||
35-30-TS-83 |
*Determination of Water Absorption Coefficient by Capillarity |
Performed according to TS EN 1925 Standard. Additionally; Open porosity test with TS-109 code is performed. |
10 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 12 |
160,00 TL /Sample | ||
35-30-TS-86 |
*Determination of flexural strength under concentrated load |
Performed according to TS EN 12372 Standard. |
5 days |
At least 20 samples at minimum size of 50 x 50 x 300 mm (the sample will not be accepted unless it meets the size requirement) |
130,00 TL /Sample | ||
35-30-TS-87 |
*Determination of flexural strength under constant moment |
Performed according to TS EN 13161 Standard. |
5 days |
At least 20 samples at minimum size of 50 x 50 x 300 mm (the sample will not be accepted unless it meets the size requirement) |
130,00 TL /Sample | ||
35-30-TS-88 |
*Determination of Geometric Properties of Natural Stone Units |
Performed according to Article 4.2 of TS EN 13373 Standard. Performed on natural stone products. |
5 days |
20 samples |
95,00 TL /Sample | ||
35-30-TS-89 |
*Abrasion Strength Determination Test (Abrasion Test with Large Disc) |
Performed according to Method A of TS EN 14157 Standard. The sample surface should be smooth and the surface to be abraded should be marked before sending. |
5 days |
At least 12 samples at the size of 200 x 100 x 30 mm |
180,00 TL /Sample | ||
35-30-TS-90 |
*Determination of resistance to ageing by thermal shock |
Performed according to TS EN 14066 Standard. Additionally; a) Analysis/test with TS-86 code, b) Open Porosity Determination (as stated in the analysis with the code of TS-109) are performed. |
60 days |
At least 40 samples at minimum size of 50 x 50 x 300 mm (The sample will not be accepted unless it meets the size requirement) |
385,00 TL /Sample | ||
35-30-TS-91 |
*Determination of the slip resistance by means of the pendulum tester (in dry conditions) |
Performed according to TS EN 14231 Standard. Product sample should be sent and the surface to be tested should be marked. Additionally, surface of the sample should be honed or polished. |
5 days |
At least 12 samples at the size of 200 x 100 x 20 mm |
210,00 TL /Sample | ||
35-30-TS-92 |
*Determination of the slip resistance by means of the pendulum tester (in wet conditions) |
Performed according to TS EN 14231 Standard. Product sample should be sent and the surface to be tested should be marked. Additionally, surface of the sample should be honed or polished. |
5 days |
At least 12 samples at the size of 200 x 100 x 20 mm |
210,00 TL /Sample | ||
35-30-TS-93 |
*Determination of Breaking Load at Dowel Hole (Identification Test) |
Performed according to TS EN 13364 Standard. |
5 days |
At least 12 samples at the size of 200±1 x 200±1 x 30±3 mm |
180,00 TL /Sample | ||
35-30-TS-94 |
Technological Test Package for Natural Stone |
a) Sample Preparation, b) All analyses/tests in between analysis/test with TS-68 code and analysis/test with TS-73 code including these analyses/tests, c) Analysis/Test with TS-78 code, d) Analysis/Test with TS-82 code, e) Analysis/test with TS-109 code, f) Analysis/test with AJ-31 code, g) Analysis/test with MP-07 code are performed. |
15 days |
At least 2 samples at the size of 300 x 300 x 400 mm |
1.770,00 TL /Sample | ||
35-30-TS-95 |
*Accredited Analysis/Test Package for Natural Stone |
a) Analyses/tests with the codes TS-72 and TS-73, b) Analysis/test with TS-78 code, c) Analyses/tests with the codes of TS-82 and TS-83, d) All analyses/tests in between analysis/test with TS-86 code and analysis/test with TS-93 code including these analyses/tests , e) Analysis/test with TS-109 code, f) Analysis/test with AJ-30 code, g) Analysis/test with MP-07 code are performed. |
40 days |
- |
2.235,00 TL /Sample | ||
35-30-TS-96 |
*Determination of Resistance to Salt Crystallisation |
Performed according to TS EN 12370 Standard. Additionally; Only open porosity test with TS-109 code is performed. |
30 days |
At least 12 samples at the size of 40±1 x 40±1 x 40±1 mm |
470,00 TL /Sample | ||
35-30-TS-109 |
Determination of *Real Density (Method A-Pycnometer) and *Apparent Density and of *Total and *Open Porosity |
TS EN 1936 |
7 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 15.
|
All for 240,00 TL or 85,00 TL for one parameter (For one sample) |
||
35-30-TS-113 |
*Determination of Frost Resistance |
Determination of uniaxial compressive strength (before and after frost) |
14 cycles |
Performed according to Article 7.3.1.1. and 7.3.1.2 of TS EN 12371 Standard. Cycle number should be indicated in the Analysis/Test Application Form. Service fee covers only one sample. |
19 days |
It should be in cylindrical shape having 50±5 x 50±5 x 50±5 mm cube or diameter x 50±5 x 50±5 mm length. Should be at least 42. |
325,00 TL |
56 cycles |
40 days |
470,00 TL |
|||||
84 cycles |
54 days |
650,00 TL |
|||||
140 cycles |
82 days |
795,00 TL |
|||||
168 cycles |
96 days |
940,00 TL |
|||||
35-30-TS-114 |
*Determination of Frost Resistance |
Determination of flexural strength under concentrated load (before and after frost) |
14 cycles |
Performed according to Article 7.3.1.1. and 7.3.1.2 of TS EN 12371 Standard. Cycle number should be indicated in the Analysis/Test Application Form. Service fee covers only one sample. |
19 days |
At least 42 samples at minimum size of 50 x 50 x 300 mm (The sample will not be accepted unless it meets the size requirement) |
325,00 TL |
56 cycles |
40 days |
470,00 TL |
|||||
84 cycles |
54 days |
650,00 TL |
|||||
140 cycles |
82 days |
795,00 TL |
|||||
168 cycles |
96 days |
940,00 TL |
|||||
35-30-TS-115 |
*Determination of Frost Resistance |
Determination of flexural strength under concentrated load (before and after frost) |
14 cycles |
Performed according to Article 7.3.1.1. and 7.3.1.2 of TS EN 12371 Standard. Cycle number should be indicated in the Analysis/Test Application Form. Service fee covers only one sample. |
19 days |
At least 42 samples at minimum size of 50 x 50 x 300 mm (The sample will not be accepted unless it meets the size requirement) |
325,00 TL |
56 cycles |
40 days |
470,00 TL |
|||||
84 cycles |
54 days |
650,00 TL |
|||||
140 cycles |
82 days |
795,00 TL |
|||||
168 cycles |
96 days |
940,00 TL |
|||||
35-30-TS-116 |
*Determination of Frost Resistance |
Determination of Breaking Load at Dowel Hole (Before and After Frost) |
14 cycles |
Performed according to Article 7.3.1.1. and 7.3.1.2 of TS EN 12371 Standard. Cycle number should be indicated in the Analysis/Test Application Form. Service fee covers only one sample. |
19 days |
At least 24 samples at the size of 200±1 x 200±1 x 30±3 mm |
325,00 TL |
56 cycles |
40 days |
470,00 TL |
|||||
84 cycles |
54 days |
650,00 TL |
|||||
140 cycles |
82 days |
705,00 TL |
|||||
168 cycles |
96 days |
795,00 TL |
|||||
35-30-TS-124 |
*Determination of Real Density with Gas Pycnometer (Specific Gravity of Soil Solids by Gas Pycnometer) |
Performed according to ASTM D 5550 Standard. (Gas Pycnometer Method) a) Volume b) Mass c) Density Determination |
5 days |
1 kg |
150,00 TL /Sample |
||