METAL-STEEL

 AND ALLOY ANALYSES

Samples in appropriate condition for analysis are accepted. Analysis/Test Reports are not issued for samples that cannot be prepared and analyzed due to the sample structure. If the analysis requested for the sample is not suitable for the structure of the sample, the detection of desired elements/compounds and/or existing standards/device programs, it is analyzed with the appropriate one. Analysis/Test Report is prepared according to the Analysis/Test Code corresponding to this analysis. Due to this price may vary .

Analysis/Test Code
Analysis/Test Name
Detection Limit
Method/Explanation

Service Period (Workday)

Sample Amount

Service Fee (Including VAT)

 
Lower
Upper
35-30-AJ-28
Pb (Lead) 20 ppm 10000 ppm

Analyses of elements of values ​​below 10.000 ppm (1%) are performed with ICP-OES instrument.

Analyses of elements of values ​​above 10.000 ppm (1%) are performed with XRF instrument.

Results are reported semi-quantitatively

10 days

For ICP-OES analysis 

Particle size of 0.5-1.18 mm,

35-16 mesh, 5 g sample

 

For XRF analysis

Minimum of 35 mm,

maximum of 50 mm,

10mm diameter height

disc sample

or

Particle size of 0.5-1.18 mm,

35-16 mesh, 50 g sample

160,00 TL for one

parameter, and 75,00 TL for each additional parameter

(For one sample )

Cu (Copper) 20 ppm 10000 ppm
Zn (Zinc) 20 ppm 10000 ppm
Fe (Iron) 20 ppm 10000 ppm
Sn (Tin) 20 ppm 10000 ppm
Sb (Antimony) 20 ppm 10000 ppm
As (Arsenic) 20 ppm 10000 ppm
Al (Aluminium) 20 ppm 10000 ppm
Mg (Magnesium) 20 ppm 10000 ppm
Bi (Bismuth) 20 ppm 10000 ppm
In (İndium) 20 ppm 10000 ppm
Cr (Chromium) 20 ppm 10000 ppm
Mn (Manganese) 20 ppm 10000 ppm
Ni (Nickel) 20 ppm 10000 ppm
Co (Cobalt) 20 ppm 10000 ppm
Mo (Molybdenum) 20 ppm 10000 ppm
V (Vanadium) 20 ppm 10000 ppm
Si (Silicon) 20 ppm 10000 ppm
Ti (Titanium) 20 ppm 10000 ppm
Tl (Tantalum) 20 ppm 10000 ppm
Cd (Cadmium) 20 ppm 10000 ppm
P (Phosphorus) 20 ppm 10000 ppm
Ca (Calciyum) 20 ppm 10000 ppm
K (Potassium) 20 ppm 10000 ppm
Na (Sodium) 20 ppm 10000 ppm